- Course Overview
- Course Details
- Admission Requirements
- English Requirements
There is a global shortage of automation, instrumentation, and control engineers due mainly to restructuring and rapid growth of new industries and technologies.
Our Master of Engineering (Industrial Automation) perfectly addresses this gap in the industrial automation industry. The program’s twelve core units and project thesis provide you with the practical knowledge and skills required. Students with a background in electrical, mechanical, instrumentation and control, or industrial computer systems engineering can benefit from this program.
The content has been carefully designed to provide you with relevant concepts and the tools required in today’s fast-moving work environment. For example, the unit on power engineering covers major equipment and technologies used in power systems, including power generation, transmission, and distribution networks.
Our Programmable Logic Controllers unit covers in-depth principles of operation of PLCs, networking, distributed controllers, and program control strategies. The unit on industrial process control systems combines the process identification and feedback control design with a broad understanding of the hardware, system architectures, and software techniques widely used to evaluate and implement complex control solutions.
Our industrial instrumentation unit identifies key features of widely used measurement techniques and transducers combined with microprocessor devices to create robust and reliable industrial instruments. Undertaking process engineering will enable you to evaluate and apply complex process calculations through the application of control principles.
The industrial data communications units provide the requisite knowledge to manage modern field buses and industrial wireless systems. Safety Systems provides an introduction to the standard safety philosophy of hazard identification, risk management, and risk-based design of protection methods and functional safety systems. The SCADA and distributed control systems unit covers hardware and software systems, evaluation of typical DCS and SCADA systems, and configuration of DCS controllers. Special topics enable you to incorporate current technologies and the knowledge acquired from the entire program and thus solve complex industrial automation problems.
The Project Thesis, the capstone of the program, requires a high level of personal autonomy and accountability, as it reinforces the knowledge and skill base developed in the previous units. As a significant research component of the program, this project will facilitate research, critical evaluation, and the application of knowledge and skills with creativity and initiative, enabling you to critique current professional practice in the industrial automation industry.
You must complete 48 credit points comprising twelve core units and one capstone thesis. There are no electives in this program. The program duration is two years full-time. We deliver units over two semesters per year, and you will take four units per semester. There will be a short mid-semester break and extended breaks between semesters.
|Semester||Unit Code||Subjects||Credit Points|
|Semester 1||ME501||Power Engineering||3|
|Semester 1||ME502||Programmable Logic Controllers||3|
|Semester 1||ME503||Industrial Process Control Systems||3|
|Semester 1||ME504||Industrial Instrumentation||3|
|Semester 2||ME505||Process Engineering (Plant Layout)||3|
|Semester 2||MXX507||Professional Engineering Management||3|
|Semester 2||ME507||Industrial Data Communications 1||3|
|Semester 2||ME508||Safety Instrumented Systems||3|
|Term||Unit Code||Subjects||Credit Points|
|Semester 1||ME601||Industrial Data Communications 2||3|
|Semester 1||ME602||SCADA and Distributed Control Systems||3|
|Semester 1||ME603||Advanced Process Control||3|
|Semester 1||DENG601 / MXX501/601||Engineering Practice and Key Research Methods||3|
|Semester 2||ME700||Project Thesis (taken over one semester – equivalent to 4 units)||12|
Additional Mandatory Units
|Semester||Unit Code||Subjects||Credit Points|
|N/A||BXX001*||Hands-on Workshop 1||0|
|N/A||BXX002*||Hands-on Workshop 2||0|
|N/A||BXX003*||Hands-on Workshop 3||0|
|N/A||BXX004*||Hands-on Workshop 4||0|
|N/A||MXX001||Professional Practice Hands-on Workshop||0|
*Applicable to students gaining entry under option 1) or 4) of the Entry Requirements.
Graduate Diploma of Engineering (Industrial Automation)
Students who elect to exit the program after successfully completing all of the first-year units, as outlined above, can opt to receive EIT’s Graduate Diploma of Engineering (Industrial Automation). If you wish to finalize the Master qualification after exiting at the Graduate Diploma level, you will need to re-enroll in the program and relinquish the Graduate Diploma testamur.
Rules of Progression
You can only attempt the Project Thesis once you have successfully completed all other units. All engineering disciplines are built up of individual bodies-of-knowledge that together target a specific application. It not only relies on the combined body of knowledge from the undergraduate degree, specifically mathematics, physics, and discipline knowledge, but also on the various units that form this program.
The ‘500’ level units are designed at the Australian Qualifications Framework level eight (Graduate Diploma). The knowledge from each unit allows you to be able to investigate challenging problems, analyse and synthesize complex solutions, and communicate your solutions and ideas.
This will enable successful progress to the ‘600’ level units at the Australian Qualifications Framework level nine (master’s degree). All this knowledge is brought together as you tackle complex application problems in your final thesis.
The content of each unit is designed to provide a graduated increase in knowledge and skills from the ‘500’ level units to the ‘600’ level units culminating in a Project Thesis. All units must be passed, or have exemptions, to achieve the qualification.
The Graduate Diploma of Engineering is nested within the master’s degree as an exit point only after the successful completion of all the ‘500’ level units of the program. Both qualifications have the same entry requirements. The second year of the master’s degree does not serve as an entry point.
EIT’s Master of Engineering programs require students to undertake 240 hours of paid or unpaid professional work-integrated learning. This can incorporate paid or unpaid internships, site visits, contributing to industry projects, and networking activities.
In undertaking an internship, students will interact with employees and become exposed to organizational policy and culture. You will familiarise yourself with organizational communication procedures, a variety of engineering disciplines, and obtain insight and practical aptitude in projects from the planning phase to completion.
If you already have some work experience in the relevant engineering field, you may apply to have credit granted by completing the associated recognition of prior learning form.
To gain entry into this program, we require applicants to hold:
- A recognized 3-year bachelor degree* in an engineering qualification in a congruent** field of practice; OR
- An EIT Bachelor of Science (Engineering) degree* in a congruent** field of practice; OR
- A 4-year Bachelor of Engineering qualification (or equivalent) that is recognized under the Washington Accord or by Engineers Australia, in a congruent**, or a different field of practice at the discretion of the Admissions Committee; OR
- A 4-year Bachelor of Engineering qualification (or equivalent)* that is not recognized under the Washington Accord, in a congruent** field of practice to this program; AND
- An appropriate level of English Language Proficiency equivalent to an English pass level in an Australian Senior Certificate of Education, or an IELTS score of 6.0 (with no individual band less than 6.0***), or equivalent as outlined in the EIT Admissions Policy.
All applicants must have evidence of automation or electrical exposure in their degree or work experience.
* With integrated compulsory twelve-week professional industry experience, training or project work of which six weeks are directly supervised by a professional/eligible professional engineer as determined by EIT.
** Congruent field of practice means one of the following with adequate Industrial Automation content (fields not listed below to be considered by the Dean and the Admissions Committee on a case-by-case basis):
- Industrial Automation
- Industrial Engineering
- Instrumentation, Control, and Automation
- Mechanical Engineering
- Mechanical and Material Systems
- Mechatronic Systems
- Manufacturing and Management Systems
- Electrical Engineering
- Electronic and Communication Systems
- Chemical and Process Engineering
- Production Engineering
***Applicants may have a maximum of one individual band of 5.5 and be granted entry subject to the provision of English language support by EIT.
|Exam Type||Overall Score (min)||Speaking(min)||Reading(min)||Writing(min)||Listening(min)|